G744

RIVETER

Check out the Tooling Manual HERE

DESCRIPTION

The Cherry G744 is a pneumatic-hydraulic tool designed specifically for the most efficient installation of 1/4” CherryMAX® rivets. However, with the proper pulling heads and adapter, this tool can install other sizes and types of rivets. This tool utilizes straight, offset and right-angle pulling heads. Extensions are available for extending the pulling heads to reach limited access areas.

Refer to the pulling head section for the correct pulling head part number for the rivet to be installed. Its all metal housing makes this tool extremely durable for use in a shop environment. It can be operated in any position with one hand. A stem catcher bag may be ordered separately and attached to eliminate costly clean-up.

SPECIFICATIONS FOR G744

AIR PRESSURE: 90 to 110 PSI (6.2 to 7.6 bar)

STROKE: 0.625 inch (15.88 mm)

PULLING FORCE: 3800 Pounds (16.90 kN) @ 90 PSI (6.2 bar)

CYCLE TIME: Approximately one second

WEIGHT: 7 Pounds (3.18 kg)

NOISE LEVEL: 72 dB (A)

VIBRATION: Less than 2.5 m/s2

AIR CONSUMPTION: 0.31 SCF/cycle (8.78 L/cycle)